Labor

Non-Precious Metal Alloys

CAM-Materials

Work Preparation and Model Production

Modelation

Embedding and Investment

Surface Processing

Ceramic Materials

Prosthetics

Dentist

Work Preparation and Model Production

Prosthetics

Miscellaneous supplies for the dental practice

Medical

Work Preparation and Model Production

Miscellaneous supplies for the dental practice

Labor_logo
Fras-gerust 1
Fras-gerust 2
Frasrohling
Starbond CoS Disc basic
Starbond CoS Disc basic
REF - Table
Cobalt based milling blank – free of nickel and beryllium ...

█ SPECIFICATION

CoCr-milling blank – free of nickel and beryllium –
Starbond CoS Disc is based on the well proven conventional casting alloy Starbond CoS. Dental technicians can continue working with the same alloy components and compositions and thus the same positive processing characteristics.

Advantages for milling centers:
  • The material is being produced blank by blank in a special casting technique.
  • A high homogeneity is thus achieved and the hardness is distributed very evenly throughout the whole blank (edge, center, core).
  • This eases the wear and tear on the milling machine and machine parts.
  • With a medium hardness of 330 (basic) and 340 (premium) Starbond CoS Disc is one of the softest CoCr-milling blanks on the market.
  • Suitable for dry and wet milling.
Advantages for the dental technician:
  • A thermal expansion coeffi cient of 14,0 ensures fl exibility when choosing the ceramics.
  • Depending on the ceramics used, no cooling period is required.
  • The alloy is bio-compatible, has a light oxide and is very easy to polish.
  • High bonding-strength with ceramic masses.
  • Suitable for laser welding.
Composition:
Co Cr W Mo Si Other ingredients max 1.5%
59 % 25 % 9.5 % 3.5 % 1 % C, Fe, Mn, N

Technical properties:
Proof stress (Rp 0.2) 527 MPa
Ultimate tensile strength 680 MPa
Tensile elongation 6.6 %
Elastic modulus 213 GPa

Density 8.8 g/cm³
Vickers hardness 330-HV 10
Thermal expansion coeffi cient 14 μm/m °C
Solidus-Liquidus interval 1305 - 1400 °C

Ref.
8 mm x 99.5 mm without edging 133504
10 mm x 99.5 mm 133506
12 mm x 99.5 mm 133503
14 mm x 99.5 mm 133501
15 mm x 99.5 mm 133507
16 mm x 99.5 mm 133508
18 mm x 99.5 mm 133502
25 mm x 99.5 mm 133509
30 mm x 99.5 mm 133510
8 mm x 98.3 mm with edging 133514
10 mm x 98.3 mm 133516
12 mm x 98.3 mm 133513
13.5 mm x 98.3 mm 133511
15 mm x 98.3 mm 133517
16 mm x 98.3 mm 133518
18 mm x 98.3 mm 133512
25 mm x 98.3 mm 133525
30 mm x 98.3 mm 133530

Starbond CoS Disc premium
Starbond CoS Disc premium
REF - Table
Cobalt based milling blank – thermically treated – free of nickel and beryllium ...

█ SPECIFICATION

CoCr-milling blank – free of nickel and beryllium –
Starbond CoS Disc is based on the well proven conventional casting alloy Starbond CoS. Dental technicians can continue working with the same alloy components and compositions and thus the same positive processing characteristics.

Advantages for milling centers:
  • The material is being produced blank by blank in a special casting technique.
  • A high homogeneity is thus achieved and the hardness is distributed very evenly throughout the whole blank (edge, center, core).
  • This eases the wear and tear on the milling machine and machine parts.
  • With a medium hardness of 330 (basic) and 340 (premium) Starbond CoS Disc is one of the softest CoCr-milling blanks on the market.
  • Suitable for dry and wet milling.
Advantages for the dental technician:
  • A thermal expansion coeffi cient of 14,0 ensures fl exibility when choosing the ceramics.
  • Depending on the ceramics used, no cooling period is required.
  • The alloy is bio-compatible, has a light oxide and is very easy to polish.
  • High bonding-strength with ceramic masses.
  • Suitable for laser welding.
Composition:
Co Cr W Mo Si Other ingredients max 1.5 %
59 % 25 % 9.5 % 3.5 % 1 % C, Fe, Mn, N

Technical properties
Proof stress (Rp 0.2) 511 MPa
Ultimate tensile strength 637 MPa
Tensile elongation 1.7 %
Elastic modulus 232 GPa

Density 8.9 g/cm³
Vickers hardness 340-HV 10
Thermal expansion coeffi cient 14 μm/m °C
Solidus-Liquidus interval 1305 - 1400 °C

Ref.
8 mm x 99,5 mm without edging 133004
10 mm x 99,5 mm 133006
12 mm x 99,5 mm 133003
14 mm x 99,5 mm 133001
15 mm x 99,5 mm 133007
16 mm x 99,5 mm 133008
18 mm x 99,5 mm 133002
8 mm x 98,3 mm with edging 133014
10 mm x 98,3 mm 133016
12 mm x 98,3 mm 133013
13,5 mm x 98,3 mm 133011
15 mm x 98,3 mm 133017
16 mm x 98,3 mm 133018
18 mm x 98,3 mm 133012

Starbond LFC Disc
Starbond LFC Disc
REF - Table
Milling blank of LFC-Bonding alloy with a wide spectrum of indications – free of nickel and beryllium – ...

█ SPECIFICATION

Milling blank of LFC-Bonding alloy with a wide spectrum of indications – free of nickel and beryllium –
  • The material is being produced blank by blank in a special casting technique.
  • A high homogeneity is thus achieved and the hardness is distributed very evenly throughout the whole blank (edge, center, core).
  • This eases the wear and tear on the milling machine and machine parts.
  • High bonding strength with low fusing ceramic masses (e.g. CARRARA, VITA VM 15, Duceragold Kiss).
  • Highly corrosion resistant.
  • Bio-compatible.
  • Especially patient-friendly due to a low thermal conductivity.
  • Wide spectrum of indications; also for large bridges.
  • Thermal expansion coeffi cient of 15.9.
  • Light oxide.
  • Suitable for laser welding.
Composition:
Co Cr Fe Mo Si Mn Other ingredients <1%
34 % 28.5 % 30 % 5 % 1 % 1 % N, C

Technical properties
Proof stress (Rp 0.2) 360 MPa
Ultimate tensile strength 540 MPa
Tensile elongation 7 %
Elastic modulus 110 GPa
Density 8,1 g/cm³
Vickers hardness 340 HV 10
Thermal expansion coeffi cient 15,9 μm/m °C
Solidus-Liquidus interval 1300 - 1370 °C

Ref.
8 mm x 99.5 mm without edging 134008
10 mm x 99.5 mm 134010
12 mm x 99.5 mm 134012
14 mm x 99.5 mm 134014
15 mm x 99.5 mm 134015
16 mm x 99.5 mm 134016
18 mm x 99.5 mm 134018
8 mm x 98.3 mm with edging 134508
10 mm x 98.3 mm 134510
12 mm x 98.3 mm 134512
13.5 mm x 98.3 mm 134513
15 mm x 98.3 mm 134515
16 mm x 98.3 mm 134516
18 mm x 98.3 mm 134518

Starbond Ni Disc
Starbond Ni Disc
REF - Table
NiCr-milling blank – free of beryllium – ...

█ SPECIFICATION

NiCr-milling blank – free of beryllium –
  • The material is being produced blank by blank in a special casting technique.
  • A high homogeneity is thus achieved and the hardness is distributed very evenly throughout the whole blank (edge, center, core).
  • This eases the wear and tear on the milling machine and machine parts.
  • Bio-compatible and corrosion resistant.
  • Especially patient-friendly due to a low thermal conductivity.
  • Ease of processing and polishing due to a low hardness of 200 HV.
  • A thermal expansion coeffi cient of 14.0 ensures fl exibility when choosing the ceramics.
  • Light oxide.
  • High bonding strength with ceramic masses.
  • Suitable for laser welding.
Composition:
Ni Cr Mo Fe Si Other ingredients <1%
60.7 % 24.0 % 11.0 % 1.5 % 1.8 % C

Technical properties
Proof stress 340 - 355 MPa
Ultimate tensile strength 490 - 510 MPa
Tensile elongation 5 %
Elastic modulus 200 GPa
Density 8.2 - 8.3 g/cm³
Vickers hardness 200 HV
Thermal expansion coeffi cient 14 μm/m °C
Solidus-Liquidus interval 1300 - 1410 °C

Ref.
8 mm x 99.5 mm without edging 131504
10 mm x 99.5 mm 131506
12 mm x 99.5 mm 131503
14 mm x 99.5 mm 131501
15 mm x 99.5 mm 131507
16 mm x 99.5 mm 131508
18 mm x 99.5 mm 131502
8 mm x 98.3 mm with edging 131514
10 mm x 98.3 mm 131516
12 mm x 98.3 mm 131513
13.5 mm x 98.3 mm 131511
15 mm x 98.3 mm 131517
16 mm x 98.3 mm 131518
18 mm x 98.3 mm 131512

Starbond Ti4 Disc
Starbond Ti4 Disc
REF - Table
Milling-blank of pure titanium (Grade 4) ...

█ SPECIFICATION

Milling-blank of pure titanium (Grade 4)
  • For the production of abutments and crowns and bridges.
  • Superb milling characteristics.
  • High bonding strength with all commonly available ceramic masses for titanium.
  • Bio-compatible.
  • Highly corrosion resistant.
  • Especially patient-friendly due to a low thermal conductivity.
Composition:
Ti Andere Bestandteile <1%
99.5 % N, C, H, Fe, O2

Technical properties
Proof stress 480 MPa
Ultimate tensile strength 540 MPa
Tensile elongation 18 %
Vickers hardness 150 HV 5/30
Density 4.5 g/cm³
Solidus-Liquidus interval 1480 - 1530 °C
Thermal expansion coeffi cient 9.7 * 10-6 K-1

Ref.
8 mm x 99.5 mm without edging 135008
10 mm x 99.5 mm 135010
12 mm x 99.5 mm 135012
14 mm x 99.5 mm 135014
15 mm x 99.5 mm 135015
16 mm x 99.5 mm 135016
18 mm x 99.5 mm 135018
25 mm x 99.5 mm 135025
8 mm x 98.3 mm with edging 135508
10 mm x 98.3 mm 135510
12 mm x 98.3 mm 135512
13.5 mm x 98.3 mm 135513
15 mm x 98.3 mm 135515
16 mm x 98.3 mm 135516
18 mm x 98.3 mm 135518
25 mm x 98.3 mm 135525

Starbond Ti5 Disc
Starbond Ti5 Disc
REF - Table
Milling-blank of titanium alloy (Grade 5) ...

█ SPECIFICATION

Milling-blank of titanium alloy (Grade 5)
  • For the production of abutments and crowns and bridges.
  • Ideal mechanical properties.
  • High bonding strength with all commonly available ceramic masses for titanium.
  • Bio-compatible.
  • Highly corrosion resistant.
  • Especially patient-friendly due to a low thermal conductivity.
Composition:
Ti Al V Other ingredients <1%
89.4 % 6.2 % 4.0 % k.A.

Technical properties
Proof stress 900 MPa
Ultimate tensile strength 930 MPa
Tensile elongation 10 %
Vickers hardness 350 HV 5/30
Density 4.4 g/cm³
Solidus-Liquidus interval 1610 - 1660 °C
Thermal expansion coeffi cient 10.3 μm/m * 10-6 K-1

Ref.
8 mm x 99.5 mm without edging 136008
10 mm x 99.5 mm 136010
12 mm x 99.5 mm 136012
14 mm x 99.5 mm 136014
15 mm x 99.5 mm 136015
16 mm x 99.5 mm 136016
18 mm x 99.5 mm 136018
25 mm x 99.5 mm 136025
8 mm x 98.3 mm with edging 136508
10 mm x 98.3 mm 136510
12 mm x 98.3 mm 136512
13.5 mm x 98.3 mm 136513
15 mm x 98.3 mm 136515
16 mm x 98.3 mm 136516
18 mm x 98.3 mm 136518
25 mm x 98.3 mm 136525

ZiroStar_W
ZiroStar W
REF - Table
Presintered zirconium milling-blanks of yttria-stabilized zirconium dioxide for metal-free dentures ...

█ SPECIFICATION

Presintered zirconium milling-blanks of yttria-stabilized zirconium dioxide for metal-free dentures.
  • Industrial manufacturing process in Germany with yttria-stabilized ZrO2 of Tosho corporation (Japan), which has been clinically approved for many years.
  • Bio-compatible.
  • Available in translucent version.
  • For the manufacturing of single crowns or bridges up to 16 units (ZiroStar transpa: up to 5 units).
  • Excellent technical properties.
  • High bending strength and ideal edge stability.

ZiroStar W with edging

      REF
10mm x 98.3 mm   white 1 pc 290101
12mm x 98.3 mm 290121
14 mm x 98.3 mm  290141
18 mm x 98.3 mm 290181
20mm x 98.3 mm 290221
25mm x 98.3 mm 290251

ZiroStar W transpa with edging

      REF
10mm x 98.3 mm   translucent 1 pc 290105
12mm x 98.3 mm 290125
14 mm x 98.3 mm  290145
18 mm x 98.3 mm 290185
20mm x 98.3 mm 290225
25mm x 98.3 mm 290255
MillStar_Waxblank
MillStar Waxblank
REF - Table
Wax milling blanks of synthetic wax for the manufacturing of wax models that burn out without residue ...

█ SPECIFICATION

Wax milling blanks of synthetic wax for the manufacturing of wax models that burn out without residue. Especially designed for the milling by dental CAM-systems. Enables CAD-design, Cam-milling and conventional casting of crowns and bridges. Available in grey colour, other colours on request.

     
    REF
16 mm x ø 98 mm 1 pc 555016
20 mm x ø 98 mm 1 pc 555020

      
    REF
16 mm x ø 98 mm 1 pc 555116
20 mm x ø 98 mm 1 pc 555120
PMMA StarBlank Provi
PMMA StarBlank Provi
REF - Table
Milling blanks of thermoplastic resine (PMMA) in the usual tooth colours for the manufacturing quality long-term provisional restorations ...

█ SPECIFICATION

Milling blanks of thermoplastic resine (PMMA) in the usual tooth colours for the manufacturing quality long-term provisional restorations.
  • Excellent milling and polishing properties.
  • Superb shade reproduction and natural translucence.
  • Highly plaque resistant.
  • Wearing time of provisional dentures in the mouth is six month.
  • No residual monomer.
  • Available with edging.
      REF
15 mm x ø 98 mm A2 1 pc 800000
A3 1 pc 800101
B1 1 pc 800005
B2 1 pc 800002
20 mm x ø 98 mm A2 1 pc 800010
A3 1 pc 800011
B1 1 pc 800025
B2 1 pc 800012
PMMA StarBlank Cast
PMMA StarBlank Cast
REF - Table
Milling-blank of transparent acrylic resin (PMMA) for the manufacturing of frames for crowns and bridges for the casting- and overpress technique. ...

█ SPECIFICATION

Milling-blank of transparent acrylic resin (PMMA) for the manufacturing of frames for crowns and bridges for the casting- and overpress technique.
  • Burns out without residue.
  • Easy to mill.
  • Also for wide span bridges.
A quick and inexpensive method for the dental technician/ the dentist to test the fi t of the denture workpiece on the master model/ in the mouth. Not for permanent intraoral use.
      REF
15 x 98 mm transparent 1 pc 800215
20 x 98 mm transparent 1 pc 800220

Starbond CoS Powder
Starbond CoS Powder
REF - Table
CoCr-milling blank – free of nickel and beryllium – ...

█ SPECIFICATION

CoCr-milling blank – free of nickel and beryllium –
Starbond CoS Powder is based on the well proven conventional casting alloy Starbond CoS. Dental technicians can continue working with the same alloy components and compositions and thus the same positive processing characteristics.
  • Ease of flow of the powder is ensured by the manufacturing process
  • A homogenous coating it thus guaranteed.
  • Frames constructed with Starbond CoS powder are therefore characterized by a high accuracy and a high density.
Composition:
Co Cr W Mo Si Other ingredients <1%
59 % 25 % 9.5 % 3.5 % 1 % C, Fe, Mn, N


Particle size distribution d50 > 30
Particle size < 85 μm

Ref.
2.5 kg 133702
10 kg 133710